Johns Manville Insulation Removal in Woodland Hills: What to Know First
Johns Manville insulation removal in Woodland Hills typically takes one to two days and runs $1.50 to $3.00 per square foot depending on access, contamination, and how much material is up there. We’re an independent Johns Manville service provider, which means we’re not restricted by manufacturer protocols that sometimes push replacement over smarter removal. This page is for homeowners in Woodland Hills who’ve got Johns Manville fiberglass batts, blown-in fiberglass, or spray foam that’s failed, gotten wet, or been shredded by rodents. If that sounds like your attic, call (559) 295-5362 and we’ll give you a straight answer about what you’re dealing with before you spend a dime.
How Johns Manville Products Fail – and How We Fix Them
Johns Manville makes solid insulation, but every product line has its failure points. Here’s what we see in Woodland Hills attics and how we handle removal when it’s time:
- JM ComfortTherm batts with the poly-wrapped facing: The kraft or poly facing on ComfortTherm batts is vapor-retardant, and in a dry climate like Woodland Hills that facing can actually trap moisture inside the batt when attic humidity spikes during our cooler winter nights. The fiberglass itself is fine, but the facing delaminates and the batt loses its friction fit between joists. We remove the whole batt, facing and all, because re-securing a delaminated facing is a losing game. You want clean cavities before anything new goes in.
- JM Attic Protector blown-in fiberglass: This is the loose-fill product most Woodland Hills homes we see have in their attics. The failure isn’t the material, it’s the settling. Attic Protector loses R-value as it compresses over time, and once it’s been walked on by cable installers or HVAC techs, you get compressed pockets that drop to near zero. Removal means full vacuum extraction and starting fresh, not fluffing it back up.
- JM Corbond III closed-cell spray foam: This is the big one. Corbond III is a two-component closed-cell foam, and when the A and B sides don’t mix at the right ratio during a retrofit job, you get soft, uncured foam that off-gasses for months. We’ve removed more poorly-installed Corbond III in Woodland Hills than we care to count. It’s a full mechanical scrape plus vacuum job, and it’s slow going. We quote those by the hour because there’s no shortcut.
- Rodent-damaged Johns Manville batts (any line): Rats and mice in Woodland Hills attics love fiberglass for nesting. They’ll shredded ComfortTherm or Kraft-faced batts and turn them into a biohazard zone. Removal includes full vacuum, droppings remediation, and air-sealing the entry points before new insulation goes in. The removal is straightforward; the sealing is what keeps them from coming back.
- Water-damaged JM products from roof leaks or AC condensate: Once Johns Manville fiberglass gets soaked, it mats down and loses its loft permanently. You can’t dry it out and call it good because the binding resin breaks down. Mold moves in fast. We remove every bit of wet material and check the roof deck and ductwork before you invest in replacement insulation that’ll just get ruined again.
Our Johns Manville Insulation Removal Process
Here’s what actually happens when you call us for Johns Manville insulation removal in Woodland Hills:
- 1
Call and talk to us: You call (559) 295-5362, a person picks up, you describe what’s in your attic. If you don’t know what kind of Johns Manville product you have, we’ll figure it out together over the phone.
- 2
Attic inspection with photos: We come out, get into the attic, and document everything. You get photos of what’s up there, whether you understand what you’re looking at or not. Chase Whitaker reviews every attic assessment personally before you get a price.
- 3
Written quote before anything starts: You get a line-item price in writing. No surprises at the door, no “oh we found more” mid-job adjustments without your sign-off.
- 4
Containment and removal: We seal off the attic access, run HEPA-filtered negative air, and vacuum or scrape the Johns Manville material out. The containment is the part that separates a clean job from a dust-filled house.
- 5
Cleanup and post-removal check: We clean the attic, document the empty cavities with photos, and point out any air-sealing issues we found. You get before-and-after photos, plus the written guarantee on the work.
What Johns Manville Insulation Removal Costs in Woodland Hills
Straight numbers, because that’s how we do it:
- Standard blown-in Johns Manville removal (1,200 sq ft attic): $1,800 to $3,600
- Batt removal with minor rodent contamination: $2,500 to $4,500
- Corbond III spray foam removal (per 100 sq ft of foam): $1,200 to $2,800 depending on thickness and adhesion
- Full removal plus air sealing (the smart move): Add $800 to $1,500 depending on how many penetrations need sealing
What moves the price: attic height and access, how much material is up there, whether there’s rodent or mold contamination, and whether the material is loose-fill (fast to vacuum) or adhered foam (slow to scrape). Every quote includes a written price before work starts and the 365-Day Done Right Promise, so if something isn’t right, we make it right. Call (559) 295-5362 for a free estimate, and we’ll give you the exact number fast.
Why Woodland Hills Homeowners Call Laurel Attic Insulation Woodland Hills for Johns Manville Work
Because we know the difference between a Johns Manville batt that needs removal and one that’s still doing its job. That distinction saves you money. We also carry materials from eight brands, including Reflectix for radiant barrier applications, so when it’s time to replace what we removed, you’re not locked into whatever’s on the truck. We’ll spec what actually works for your attic thermal envelope. The written price, the live arrival tracking, the photo proof, the 365-day guarantee: those are table stakes at Laurel. “Laurel stays green all year, so should your home’s comfort” is the name idea, and Chase Whitaker, who’s been doing insulation work across the San Fernando Valley since trade school at Los Angeles Trade-Technical College, runs our Woodland Hills calls personally. If your attic is under-insulated, your AC is just paying rent to the outside air.
FAQs
No. Johns Manville product warranties cover manufacturing defects in the material itself. Once you remove insulation because of a roof leak, rodent damage, or installation failure, you’re not affecting a warranty claim unless you’re removing defective material to begin with. We’re an independent Johns Manville service provider, not an authorized dealer, so we’ll tell you straight up when removal is worth it and when it isn’t.
Most Johns Manville removal jobs we run in Woodland Hills start within 48 hours of your call, and the removal itself is usually done in a day. Corbond III foam jobs take longer because scraping cured foam is slow, honest work. Call (559) 295-5362 and we’ll give you a real timeline, not a vague window.
If the existing material is dry, clean, and just settled, adding more on top can make sense. If it’s wet, rodent-contaminated, or has mold, removal is the only move that won’t trap the problem under fresh insulation. We’ll tell you which category you’re in after a look, and we won’t push removal when topping off would do the job.
Yes, and we do it a lot in Woodland Hills, especially the Warner Center corridor where older buildings got foam retrofits that didn’t cure right. We scrap off the failed Corbond III, check the substrate, and spec a replacement that fits the building. Whether that’s open-cell or a different closed-cell brand depends on the assembly.
No. We handle removal of fiberglass, spray foam, cellulose, vermiculite from all major brands, including Owens Corning, Rockwool, CertainTeed, Knauf, and others. Johns Manville is just one of the brands we see most often in Woodland Hills attics, and we know its failure modes well enough to give you an honest read on what you’re looking at.
If you’ve got Johns Manville insulation that’s failed, gotten wet, or been wrecked by rodents in Woodland Hills, call (559) 295-5362. We answer, we show up, we give you a written price, and we back the work in writing. Free estimates every time.
Written by Chase Whitaker, Owner, Laurel Attic Insulation Woodland Hills at Laurel Attic Insulation Woodland Hills, serving Woodland Hills and nearby areas.